Black Arts Barrel Band System for Air Venturi Avenger

The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2x20 Adapter be paired with our 2 component Barrel Band System. Material Carbon Filled (CF) PETG CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG. TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion. Features The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation. TPU has rubber like characteristics adding dampening qualities to our barrel band. No grub screws! The lower section clamps securely with a single M3 alloy steel screw and nut. The nut is held captive within an internal slot providing a secure hold while maintaining a clean appearance. Bolstered design along the circumferenceincreases flexural modulus (stiffness) and aesthetic appeal.